Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

2019 Veloster PTS Manual 3x Lock Evo One

Getting conflicting information from local installers. Would prefer not to have an extra remote but if need be I will purchase one. 2019 Hyundai Veloster Push to start Manual.Looking at installing an Evo-one Will the 3x lock start work? Can I set the ready mode without another remote? Any help appreciated

0

2013 elantra gt

I installed an evo-one on a 2013 Elantra GT (PTS) today. The firmware says that the OEM remote will not operate while the engine is running ... But, it works normally ... It both opens and closes. What's the matter?

0

installed on a 2017 santa fe works once and no longer works

I installed on a santa fe 2017, I did all the programming correctly, but when I go to the forehead it only turns on once after powering the module, after turning off and trying to turn on it doesn't work anymore, so if I turn the module off and on again it works for the first time and then it doesn't work anymore, does anyone have any idea what might be going on?

0

2011 Genesis Coupe, No 3x Lock to Start Evo-All

I have an Evo-All installed with a Viper Smart Start module and im having issues getting the OEM 3x Lock to start to function. The evo will remote start via the smart start app and the unlock/lock seems to function fine there, but no matter what i do i can't get the 3x lock to start working. The blue led only lights up on the fortin when the unlock is pressed but never for the lock. Any ideas what could be causing this?

0

Evo One and Drone Mobile question.

Hello. I have an evo one installed in my 2013 sonata, with drone mobile dr6400. Everything works great. However, the 3 time push lock button. I was under the assumption that the 3x push lock to start doesnt work without an rf kit. So if I were to purchase one would i be able to use it with the drone mobile installed as well?

0

Sonatas 2014 cranks but wont start without the key in

Hyundai Sonata 2014, Key, regular installation, Canadian market with immobilizer, using with OEM remotes. Installed EVO-One with firmware bypass 76.52 and remote start 1.24. First off, in the installation manual #21721 you are missing the wire connection for yellow ignition+ wire (yellow A1 wire is marked but no connection is drawn). Please confirm it should be connected, as I actually connected it. Basically, after installation the starter cranks but won’t start, unless keys are in. Did couple of programming for bypass, every time on STEP4 where the manual says the blue light should blink 10 times it actually blinks 20 times (maybe that’ll help). Other than that, it seems to program OK. Another thing I noticed, when I run the car with keys there is a yellow light on the EVO One. Any ideas what should I check?

0

Genesis sedan 2016 will not remotely unlock doors when engine is running in remote start.

Evo one module installed.Initially started but shuts down after a couple seconds.Reprogrammed tach signal off.Unit now starts but doors do not unlock unless remote start is shutdown

0

Genesis sedan 2016 will not remotely unlock doors when engine is running in remote start.

Evo one module installed.Initially started but shuts down after a couple seconds.Reprogrammed tach signal off.Unit now starts but doors do not unlock unless remote start is shutdown

0

Remote start does not start elantra

When I try to remote start evo one parking lights flash 4 times and nothing happens. Automatic transmission the loop is already cut. Tried previous firmwares too still not working.

0

Evo one won't crank hyundai elantra

I installed evo one in my 2017 elantra.Updated the module with flashlink updater. Activated C1,D6 and 38.2. It is programmed in the car but when press lock 3 times accesory comes on for 1 sec and then shuts off. Does not crank at all

0

Hyundai Azera 2016 cranking but not starting

Hello
i am using evo one for Hyundai azera 2016 push to start 
regarding car starter using factory key 3X
after finish programming when i press 3x the car is cranking but not starting
is there any advice for the firmware or setting 


 

0

2017 Sante fe evo all take control

Just finished an evo one install on a 2017 sante fe limited. everything works great, except sometimes take control when the push to start button is pushed once it only puts the vehicle in ACC mode and the car will shut down if the brake is pushed after. However if button is pushed twice ( while pressing the brake on the second time) half the time shuts the evo one off and you are able to drive away. problem being this only works less then half the time. Has anyone else come across this? thanks.

0

Evo one won’t unlock door while remote started .

2017 Hyundai Elantra standard key with evo one. configurwd as three times lock button to start . has the reccommended firmware and the recommended options turned on . vehicle will remote start but when running the vehicle oem remote won’t unlock doors . turned on all the options the guide told me to do . not sure why it won’t unlock doors when under remote start . thanks

0

2003 hyundai Santa fe

Are there other solutions for bypass on a 2003 hyundai Santa fe? I am installing a remote start in this vehicle and the vehicle search only brings up the "evo-one". The customer does not want the "3X lock" start. Surely there must be a way to use the evo-all? Thanks, Mike.

0

program evo-one for 2010 veracruz limited proximity key

I have installed a evo-one as a stand alone system on a 2010 hyundai veracruz limited proximity key. Ihave flashed the module to firm ware virsion 76.16 and bypass option d6. Wont start whenn hitting the lock lock lock on the factory remote.what am I doing wrong? Do I need to program a different option?

0

2011 Hyundai Tucson Regular Key EVO ONE will not remote start

EVO one wired to 2011 Hyundai Tucson regular key no blue data wire per evo one install 2011 hyundai tucson installation guide.  Evo one has been flashed to recommended firmware for this car, hardware 2.  The unit appears to program correctly per program #2 (car has no blue data wire) and blue light flashes rapidly after start.  Turn engine off and back to run, and the yellow light remains steady yellow.

The unit is detecting oem keyfob lock and unlock signals (blue can light flashes).  3x lock start has been activated on both remote start and bypass.  3x lock on the oem keyfob initiates remote start...the units red light goes solid red, then yellow light solid also lights up.

This is where the issue is.  The car flashes its parking lights one time, and on the dash the indicator for "door open" turns on and the dome light illuminates....but nothing happens.  There is no initiation of ignition, accesory or even an attempt at cranking.  This sequence happanes twice, and then the unit shuts down.  It does appear that the small red indicator light by the yellow "loop" is rapidly flashing during this process, as if the alarm has not been disabled?

I have rechecked all connections numerous times.  Correct locations and solid soldered connections. Have tried enabling unlock before start/locl after remote start with the same result.

Tested as both remote start and bypass mode, same results.  

SN: 002B01005141

 

Any help with figuring out how to remote start with 3x lock press greatly appreciated.  The fact that the unit responds to oem keyfob presses in encouraging...would love to get RS working.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue