Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

can remote start be fitted to my car

Hi I live in the UK and have a UK spec 2019 VW Tiguan SEL 2.0TDi DSG 4Motion with STD key entry and start.To start the car I must have my foot on the brake pedal if I don't the car wont start.Can remote start be fitted to this car?

0

Just bought a VW Tiguan 2017 push to start receive only oem key but discover that fortin remote start is installed. that

An electronic gadget is installed on windshield blue and red light blink and written evo on it. Can I link my oem key to 3x lock??

0

Windows wont work when started with remote start.

2020 Volkswagen Tiguan Standard Key. Installed Evo All according to instructions and upated via flash link. When vehicle is started with key in ignition windows works fine. when vhicle is started with lock-lock-lock all windows do not fuction. power mirrors also dont work. I also get a "Error: start-stop system" on the dash when started with remote start only. Can someon pleas help.

0

2013 Touareg no crank 3x lock Thar-AUD1/Evo all

2013 Touareg 3.0 TDI, unit programs fine however when 3x lock the vehicle dash lights up but no crank. I triple checked PIN2 of the BCM connector for the brake lights as directly across in PIN18 is the same color wire, also with a test light at the module it lights up with ign on and pressing the brake pedal. I assume its an option in the module that needs changing. Module S/N is 001A07217040 Thanks

1

3x Lock not always working to start 2014 VW Touareg Evo-one w/Thar-AUD1

New install on Touareg - working through a few small issues, but biggest is that the 3X lock does not allways start the vehicle - cluster doesn't light up at, parking lights and audible chirp work and confirm 3 presses getting to vehicle. Sometimes the second try works. Seems inconsistent. Is there a required speed (too fast or too slow perhaps) that might be causing the EVO-All to "miss" the command? Is there an error code guide to the LED's on the EVO-one that might help diagnose the issue? Thanks in advance, Jon

0

Fob doesn’t open car after remote start

I installed an EVO ALL on my Passat 2016 automatic transmission with OEM fob, it remote starts with no problem, i select 15 minutes option, but when I try to unlock the car with my fob it doesn’t respond, I have to wait until car stops then unlock it, also I did try opening the car with the key lock and the car stops when I open the door. Is any especial configuration to make the fob works while the car is running on remote start?

0

How can I start a car using TB-VW when losing a car key?

The car has autostart (stand Alone). How can I start a car using TB-VW when losing a car key?

0

2017 VW Tiugan Lights/Radio Stay on After 15min

The Vehicle after the Remote start times out (set to 15min) leaves the lights on and the dash light up, I have installed an Evo-All with a T-harness and the VW Module. I had no issues programing the unit, but it does seem to have issues starting with the 3x Lock. Any ideas what could be causing this issue?

1

VW Tiguan with T Harness gets no power when data link plugged in

Installing EVO all on 2014 Tiguan per guide #65501. When I go to plug in data link connector I get no power in order to try and program module. There are only 2 wires to connect, besides the harness connector itself, for the brake and ignition so Im not sure how to get power for the module? Any ideas.

0

Is it possible to use EVO-ALL as OEM remote 3xLock starter AND alarm, at the same time?

Is it possible to use EVO-ALL as OEM remote 3xLock starter AND alarm, at the same time, without any optional module/kit (but with a valet key, of course)?

I don't see a clear picture of a reliable wiring connection for that.

In document 12971.pdf (20140528), on page 10, said that connection B would be for that, but on page 12 in the same document, connection B requires an external remote starter...

My car: VW Golf 6, my 2009, DSG7.

Thank you!

0

2012 TOUAREG standalone

Today I installed a remote start (OEM 3-x lock) on the 2012 Touareg (the key ... not the PTS). After a remote start, the factory remote usually closes and opens the doors. And, it can the engine shut down too (with 3-x lock). Simply, thus, do not flash hazard lights (and parking lights also do not light after start-up, - in the scheme too is not present).       Why does the evo-all instruction say that after remote startup, the OEM does not work?

0

DCRYPTOR LIMITED

after many failed attempts to program the dcryptor, its telling me it has reached the limit for this vehicle, can it be reset???? what do i do now??? i tried another evo all with a spare key and was able to use the dcryptor again. Dcryptor says it is programmed, however when i plug the module in the yelllow and red lights flash, what am i missing??? 2012 jetta, 3x start

0

2011 MK6 Golf R Sometime Disarms Sometimes Doesn't

Hi I have some small issues with the fortin EVO-ALL connected via datalink to A Compustar FT7000 alarm/remotestart combo I am using my OEM Remote for locking/Unlocking duties and the Drone mobile system for remote start. below are the issues Sometimes on unlock it disarms the FT7000 sometimes it doesn't. Sometimes when starting the car with the key the hatch either locks or unlocks. Won't Remote start with OEM Remote (Lock Lock Lock). Firmware 75.22 The car is a right hand drive Australian delivered car with oem alarm and oem ultrasonics. All help would be appreciated Regards Chris Wormald

0

2011 VW Tiguan 3x lock won't start c1,d1 already enable

Ok so I got a Evo-one for my wife's 2011 VW Tiguan everything is hooked up correctly the diagram that is provided through you is slightly different 2009 and 2011 have differences in wiring , now I see the module doing its job which is tying to start the vehicle but nothing turns over on the veicle side the only thing it does is lock and unlock , now it says on the diagram to put it on function 31 mode 4 , is that something that would of switch over with the flash, If I need to switch it my self how would I do that with the factory remote ???

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue