Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

No Trunk realease?

Honda accord, civic and Acura etc...Most of Hyundai having problem not communicatiing once in a while when using data-link, so I do installs using without data-link and this is not a big deal. Honda has no issue using data-link but trunk release is not working. I had to use relay separately to make reverse polarity trigger. This was okay off-season but during remote start season, this will slow us down for sure. Is there any fix for this without using relay? Or using without data-link would take care of this issue? Let me know thanks.

0

No Trunk realease?

Honda accord, civic and Acura etc...Most of Hyundai having problem not communicatiing once in a while when using data-link, so I do installs using without data-link and this is not a big deal. Honda has no issue using data-link but trunk release is not working. I had to use relay separately to make reverse polarity trigger. This was okay off-season but during remote start season, this will slow us down for sure. Is there any fix for this without using relay? Or using without data-link would take care of this issue? Let me know thanks.

0

Starter engages again when brake pedal is pushed

Installed on a 2013 CRV with the t harness. Remote start functions, however once entering vehicle, inserting key and rotating to position 2/ Run, when I hit the brake pedal and the remote start shuts down, it briefly powers the starter and I can hear the starter contact the flywheel briefly before it shuts off and disengages. I have the start attempts set to 1 and it made no change. What other setting could cause this or is the unit defective?

0

Starter engages again when brake pedal is pushed

Installed on a 2013 CRV with the t harness. Remote start functions, however once entering vehicle, inserting key and rotating to position 2/ Run, when I hit the brake pedal and the remote start shuts down, it briefly powers the starter and I can hear the starter contact the flywheel briefly before it shuts off and disengages. I have the start attempts set to 1 and it made no change. What other setting could cause this or is the unit defective?

0

Starter engages again when brake pedal is pushed

Installed on a 2013 CRV with the t harness. Remote start functions, however once entering vehicle, inserting key and rotating to position 2/ Run, when I hit the brake pedal and the remote start shuts down, it briefly powers the starter and I can hear the starter contact the flywheel briefly before it shuts off and disengages. I have the start attempts set to 1 and it made no change. What other setting could cause this or is the unit defective?

0

Starter engages again when brake pedal is pushed

Installed on a 2013 CRV with the t harness. Remote start functions, however once entering vehicle, inserting key and rotating to position 2/ Run, when I hit the brake pedal and the remote start shuts down, it briefly powers the starter and I can hear the starter contact the flywheel briefly before it shuts off and disengages. I have the start attempts set to 1 and it made no change. What other setting could cause this or is the unit defective?

0

Need the REMOTE STARTER PROGRAMMING PROCEDURE

I installed the Evo One and THAR-ONE-HON1 on a 2009 Honda Fit Automatic. KEY BYPASS PROGRAMMING PROCEDURE is complete, but at the end of the instructions - it says "REMOTE STARTER PROGRAMMING PROCEDURE". REFER TO THEQUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING. I don't have the guide, can you please email me a copy? Thanks,

0

Civic 2016 key start - 3x OEM remote start not working - Evo-One

2016 civic with regular key start. I am using the T-Harnass. Things to note. I did not hook up parking lights, horn or add the Hoodpin (since a civic person who did this said he didnt and it was fine). I also have not connected that brown wire since its not in the isntructions so I assume its not required. yellow wire was cut because this is an automatic transmission. I have flashed the EVO one to 73.26 (recommended for my civic). I flashed to this one because the latest firmware could not get the setup right in the car. It would not do the required light flashing order in step 4. So by downgrading to 73.26 it was able to work. I have set D2 and C1 to ON and I have turned on Fuction 38-2. Pressing lock 3x doesnt do anything except lock the car and engage the alarm (makes one beep as usual). I am not sure what else to do here. When I click lock the blue light flashes on the Evo-One. Yellow light works as usual when the ignition is on.

1

My remote car starter stopped working !

Hi, . Pressing START results in several ( 2 or 3 ) flashes of the turning lights but the car won't start. LOCK and UNLOCK still function. Blue windshield LED always on, no flashes. What could be the problem ? Thanks

0

check keyless starting system using remote start

Do you know what is causing my car to display CHECK KEYLESS STARTING SYSTEM on the panel when using remote start, EVO ONE SYSTEM, it will start the car but the Check keyless starting system message comes up when I use the remote start. no message if I start the car with regular push botton. 2015 HONDA CIVIC PUSH START.

15/02/2018

Honda Moike (580Pts.)

0

Manual transmission

Will this work with manual transmission?

0

how to reset EVO ONE remote starter to a factory default

How to reset EVO ONE Remote starter and alarm bypass module using FLASH LINK UPDATER and a computer to factory default. I already tried to push program botton while connecting it to the flash link wait for red light and push again until the three lights alternate, but the Remote start side it's not responding to the flash link anymore, only the bypass side, I need to do a factory Reset to see if it works. Thanks.

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

EVO-ALL Car will not start keeps setting the Immobilzer

HI, I have installed the Evo-All unit into a 2004 Honda Accord I am using the 3024 install guide Install #1 and Program #1 It programmed perfectly the first time. The car will not start and tripped the immobilzer Honda has built into the car. I was told to disconnect the battery & wait 10 minutes after shorting out the 2 main battery cables Hook it all back up then program the Evo again. The EVO will not reprogram and stalls when I turn the key tothe on position. it does not flash rapidly red or blue.. I performed the above and still no dice. The immobilizer keeps kicking in. Sorry the service number is not available as it is in the garage 1 mile away form this PC

0

cannot lock the door or unlock the door when the evo one is activate

I have an Honda civic 2017 push to start manual. I have installed the evo one. i didnt connect the parking light to the car. i have programmed the evo one with the flash link for the version of my car at the moment, i think its the version 73.27 (if it can help i have installed the fortin evo one in november 2017) and didnt touch it after that. Also i dont use the T-harness i plugged every wire to the car directly like in the installation guide. My problem is : i can activate the remote start. but when i leave the vehicule and when i press my OEM remote to lock the door it does nothing, the car still running. i need to open the door and press the brake pedal to close the car. so i dont know why the door lock doesnt work. ive tried to buy the evo start to control my car with my cell phone. so i have installed the evo start in my car, i programmed everything and when i try to lock the door with the app it doesnt work too. i tried to start the car, but still do nothing. I did not plug the wire for the lock/unlock with the car (cause i dont really know which wire is it) and i dont know if its really my problem cause i read the can bus should do it. is anyone know what is my problem, cause i cant figure out what is the problem ? thanks in advance.

0

cannot lock the door or unlock the door when the evo one is activate

I have an Honda civic 2017 push to start manual. I have installed the evo one. i didnt connect the parking light to the car. i have programmed the evo one with the flash link for the version of my car at the moment, i think its the version 73.27 (if it can help i have installed the fortin evo one in november 2017) and didnt touch it after that. Also i dont use the T-harness i plugged every wire to the car directly like in the installation guide. My problem is : i can activate the remote start. but when i leave the vehicule and when i press my OEM remote to lock the door it does nothing, the car still running. i need to open the door and press the brake pedal to close the car. so i dont know why the door lock doesnt work. ive tried to buy the evo start to control my car with my cell phone. so i have installed the evo start in my car, i programmed everything and when i try to lock the door with the app it doesnt work too. i tried to start the car, but still do nothing. I did not plug the wire for the lock/unlock with the car (cause i dont really know which wire is it) and i dont know if its really my problem cause i read the can bus should do it. is anyone know what is my problem, cause i cant figure out what is the problem ? thanks in advance.

0

Honda Civic 2010, EVO-ALL does not program

I can't program my evo-all for my car Honda civic 2010. The unit was updated at the recommened. I do correctly step by step and all the wire for sure correlted. I dont know why the unit look like not flash RED LED 10x program step 6. It does flash RED LED to fast, but I can't count how many and going to blue LED flash rapidly.

0

Vehicle does not switch off when key is removed

Just finished installing EVO ONE with THAR ONE HON2 t harness. Enabled C1 and 38.2, programmed and the vehicle starts with 3x lock. However when placing key into ignition turning to on and then turning off the vehicle continues to run until the 15 minute timer passes. I can press lock 3 more times and it shuts off. If I leave the key in the run position and wait longer than 15 minutes the vehicle will stay running and then shut off with the key. Am am I missing a setting? Also as a result the EVO keeps the parking lights on during the 15 minutes even with key on and this causes the auto headlights not to function until the 15 minutes has passed. Probably related to the system not switching over to the vehicle ignition as well.

0

Vehicle does not switch off when key is removed

Just finished installing EVO ONE with THAR ONE HON2 t harness. Enabled C1 and 38.2, programmed and the vehicle starts with 3x lock. However when placing key into ignition turning to on and then turning off the vehicle continues to run until the 15 minute timer passes. I can press lock 3 more times and it shuts off. If I leave the key in the run position and wait longer than 15 minutes the vehicle will stay running and then shut off with the key. Am am I missing a setting? Also as a result the EVO keeps the parking lights on during the 15 minutes even with key on and this causes the auto headlights not to function until the 15 minutes has passed. Probably related to the system not switching over to the vehicle ignition as well.

0

Vehicle does not switch off when key is removed

Just finished installing EVO ONE with THAR ONE HON2 t harness. Enabled C1 and 38.2, programmed and the vehicle starts with 3x lock. However when placing key into ignition turning to on and then turning off the vehicle continues to run until the 15 minute timer passes. I can press lock 3 more times and it shuts off. If I leave the key in the run position and wait longer than 15 minutes the vehicle will stay running and then shut off with the key. Am am I missing a setting? Also as a result the EVO keeps the parking lights on during the 15 minutes even with key on and this causes the auto headlights not to function until the 15 minutes has passed. Probably related to the system not switching over to the vehicle ignition as well.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue