Utilisateur

Hi ,

I am using Evo-all to bypass the immobiliser to remote via viper alarm system for 5706V in Mitsubishi Lancer evolution 2008.

the immobiliser didn’t deactivate after programming 

Hi , 

i have followed the guide for mitsubishi eclipse cross. after completed the decrytor process. ( with sugguested setting loaded)

notice the following function can't work out.

1) when the remote start(3x lock) is activated , the dashboard promote out a error promote "electrical system service require " 

2) the evo-all can't able to synchronise with crimestopper sp-502 , both of the device doesnt tele the event. (example when activate/press OEM remote lock , the crime stopper remote doesn't display lock )

Hi , 

i have followed the guide for mitsubishi eclipse cross. after completed the decrytor process. ( with sugguested setting loaded)

notice the following function can't work out.

1) when the remote start(3x lock) is activated , the dashboard promote out a error promote "electrical system service require " and follow by the OEM alarm trigger. ( wiring all check , and cant understand where went wrong)

2) when the hood is open or activated (without press on start engine button) , the car goes to ignition mode and promote error.

3) the evo-all can't able to synchronise with crimestopper sp-502 , both of the device doesnt tele the event. 

i am confuse of what went wrong after following the instruction carefully.

i am installing for 2018 mitsubishi eclipse cross , i am pairing the fortin evo-all with crime-stopping sp-502 as rf kit. 

i had bought a fortin flashlink 4 and download the latest firmware to the evo-all device. setting are all recommended to software.

i had follow the instruction manual from the guide. when start up the device , the Car Dashboard prompt out all the service checklight. 

i had check all the cables and couldn't able to find out what went wrong.

please advice.