Installing a Evo-One in a 2015 Kia Sorento with T-Harness and standard key. Completed wiring. Spliced yellow A1 into pink ignition wire in T-Harness. Cut white wire in T-Harness. I have flashed the Evo-One with the lastest firmware in both remote start connection and bypass mode. In FlashLink Manager for desktop Pro Mode, I set the mode to OEM Lock-Unlock-Lock on 38.4(?). I am using an OEM key. That is the only option I configured.
With the key out, I plug in the 6 wire harness while holding the programming button. Lights flash red->blue->red & blue->yellow and I release the button. Yellow is solid on, other lights are off. I plug in the remaining connectors. Insert the key into ignition, and turn to RUN position. The light stays solid yellow.
I have probed the C2 & C4 and have 2.4v for CAN-Low at the C connector. I have 2.6v at the C1 & C3 connector for CAN-High. I can not get to the blue flashing x10 times in the programming steps.
Car starts normally with key.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
