I've installed an AX-ONE on my 2015 Ford Focus and it works properly off of the factory remotes.
I'm adding the AX-RF2 universal antenna with 2 remotes to the system.
Previously I asked a question about the need to change programmed function settings using the Flash-Link to allow for programming the remote/activating the antenna.
I received a reply stating that I do not need to change any program function settings.
The problem that I am having is that the antenna LED never lights up and I have not been able to program the remotes.
I've tried looking up installation instructions for the AX-RF2 without any success.
I found the instructions and manual for the FTX44-2W and RF442W (which appears to be the same unit under the EVO name brand).
It appears that I only need to plug in the AX-RF2 antenna into the AX-ONE's (4 PIN) Data-Link antenna port and then go through the programming steps that I've listed below:
1: Turn ignition On
2: Turn ignition Off
3: Turn ignition On
4: Antenna LED "should" turn On (but doesn't)
5: Press Brake Pedal 4 times
6: Press & Release the {-} button then the {Stop} button on each remote
7: Turn ignition Off
Am I missing something or using the wrong instructions?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
