Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage



Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question


2015 Ford Kuga PTS can't open doors while remote started

Hi! My Kuga have only keyless start but doesn't have keyless entry (Trend+ trim - one step lower than Titanium). Is there still no solution to open doors with oem fob while car is remotely started by evo-all standalone? When I press unlock button I see that fortin detect it by blinking with blue LED but nothing happens. I've connected A5 and A19 pins to unlock and lock signals of BCMkuga, turned option A1 on - no use.


2017 Transit Remote Unlock - Stops Working After 20 Minutes

I'm trying to use the EVO-ALL with a cellular modem to remotely unlock the vehicle. The EVO-ALL has been flashed with the latest firmware and was successfully programmed to the vehicle for CAN bus only (blue LED flash pattern displayed). Everything unlocks properly if the EVO-ALL purple/white wire (unlock) is briefly grounded within 20 or so minutes of the vehicle ignition turning off. If the vehicle is locked with the OEM keyfob (lock button pressed twice) and 20 minutes elapses with the ignition off, the EVO-ALL stops unlocking the vehicle. Grounding the purple/white wire causes the EVO-ALL's blue LED to briefly flash, but nothing happens on the vehicle. Based on the two diodes coming off the EVO-ALL white/red wire (ignition/accessory), I'm thinking this wire should be providing voltage momentarily prior to unlock, but no voltage ever appears on it. If this wire is used only for remote start, then this wire isn't relevent in our scenario. Any ideas?


Ignition activates when unlock is pressed

The ignition turns on when you go to unlock the doors with the remote fob. Just for a second or two. Is there a option that I need to activate with the programmer? It could possibly be the remote start. It's an over seas unit purchased on amazon by the customer. Didnt have time to diag remote start. It starts the engine and locks the doors with no problem. 2014 f150


2012 Focus wont unlock with RF642W

2012 Ford Focus wont unlock doors with RF642W remote (locks fine)

Connected everything according to diagram, center lock/unlock button and green/purple wire behind door kick panel.

Start and Shudwon works,  lock works but wont unlock.


Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer