Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

4

Informational: Interfacing Compustar T11/T12-style remotes to EVO-ONE

I'm not a Fortin rep but someone might find this useful -- I struggled with making these types of Compustar remotes work with the EVO-ONE. There are a few reports here of success with these remotes, and I had to do alot of experimentation to get satisfactory results, because these reports were somewhat vague and didn't cite which Firmware revisions were used when these observations were made. I can report that Firmware 7.1.24 (latest as of this thread) allows full function of these remotes without any drama, with the exception of a missing "remote start ready" (engine icon) indicator, which to me isn't any type of deal-breaker considering the capabilities of these units. Temperature, voltage, trunk, remote valet, alarm paging, etc. all work. The Fortin documentation states that FW 7.0.96 must be flashed for (supported) Compustar remotes, but this FW level is not sufficient to get full function from the (unsupported) T11/T12 remotes. 7.0.96 - Couldn't program remotes with Mode 1 or Mode 5. 7.1.16 - Remotes programmed immediately on Mode 5 and function, but temperature and voltage status reported erroneous numbers. 7.1.24 - Remotes programmed immediately on Mode 5 and all functions appear to work, with the exception of the "ready" engine icon which indicates a remote start is possible. IMHO, might be an issue for manual-transmission vehicles. Remote start functions regardless. To get this remote to work, flash the EVO-ONE to 7.1.24, and program the remotes with Mode 5. That's it. ** IMPORTANT ** -- There's no LED or valet switch on the antenna, even though the plastic housing looks like these features are there. This seriously confused me. I was trying to press that plastic square over-and-over thinking this was a valet switch, but it's a cosmetic feature, and does nothing, and there's no LED. I had to pop the antenna open to confirm this. Just flash to 7.1.24 and follow the instructions in the Compustar document from Fortin to program the remotes using Mode 5.

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

2

Compustar T11 Pro abnormalities

This isnt a question. This is meant as a tool for anyone who experienced the same problems as myself with no real correct answers to be found online. I recently installled and had issues with using the compustar t11 pro rf kit with my evo-one. When using the valet switch and RF remote to program functions and options the following button mapping is correct: Lock: 1 unlock: 2 start: 3 trunk: 4 Also when I orginally purchased the T11 pro the two-way remote that came with the kit did not function correctly, which Compustar quickly remedied. However when programming the new remotes(2wt11r-ss, 1wg8r-ss) to the evo-one with the newest firmware installed I had to press the trunk button on both remotes w/ a 2.5 second hold to get them to register with the evo-one. All the strange button mapping aside. Lock/Unlock/remote start/etc, two-way functions, and vehicle temperature reading on the remote all function normally.

2

Compustar T11 Pro abnormalities

This isnt a question. This is meant as a tool for anyone who experienced the same problems as myself with no real correct answers to be found online. I recently installled and had issues with using the compustar t11 pro rf kit with my evo-one. When using the valet switch and RF remote to program functions and options the following button mapping is correct: Lock: 1 unlock: 2 start: 3 trunk: 4 Also when I orginally purchased the T11 pro the two-way remote that came with the kit did not function correctly, which Compustar quickly remedied. However when programming the new remotes(2wt11r-ss, 1wg8r-ss) to the evo-one with the newest firmware installed I had to press the trunk button on both remotes w/ a 2.5 second hold to get them to register with the evo-one. All the strange button mapping aside. Lock/Unlock/remote start/etc, two-way functions, and vehicle temperature reading on the remote all function normally.

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer