To program your carlink,
make sure to follow their instructions on how to connect it to the EVO-ALL or EVO-ONE using their own HRN-LLRS-01 harness
setup the app for fortin
follow programming in car
Here is a copy of their guide. Please read attentively every step of programming since their is setup in the app you must first do. https://fortin.ca/download/64631/ascl6-install-guide-64631.pdf
EVO-ONE Programming
Following the RED LED on the BACK of the unit, not the one on top.
Igniton ON-OFF-ON (red led on evo will turn on solid)
Hit brake 4 times (red led will flash on each brake press)
At this point wait 10 seconds then shut off the car.
EVO-ALL Programming
Please first try the EVO-ONE. It was added to the EVO-ALL firmwares.
Otherwise, this older method is still functional.
Disconnect the 20-pin connector
Disconnect the 4-pin black connector
Press and Hold programming while inserting 4 pin connector.
Release when the LEDs are BLUE and RED
Press and HOLD programming button, wait until the BLUE and RED LEDs turn and then BACK ON. Release when they turn back ON.
Plug in 20-pin connector
Turn ignition ON, all three LEDS will turn ON
Wait 10 seconds, then turn off ignition.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
