2017 Toyota Sienna H-Key
Options are set based on installation/wiring guide 31121 rev 20170503. I can remote start vehicle and I have it wired up to open the right sliding door and power lift gate but when I remote start the vehicle, I cannot operate them via the key fob. Module shows blue LED when I press either button on the fob. I can manually open the door/lift gate once I unlock the vehicle using the key fob. If I don't remote start the vehicle, everything works as usual.
Bypass firmware 79.42. Options A1-A10, C1 and D2 are enabled. Vehicle has OEM Alarm with hood switch bypassed.
Remote Start firmware 1.21. Tried both options 25.1 and 34.3 separately, still doesn't work. Options 38 is set at 38.5 (personal preference).