Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

1

Evo All w/ Evo Start no RF kit programming

2018 Ford Edge, Standalone Evo All install, and adding Evo Start. Can not get the Evo Start to program or "mate" to the Evo all. I do have temp, GPS, and bluetooth telemetry to cell via Evo Start but can not get any functions to work via cell app. Programming, I have tried hold program button, plug in black data, release on RED AND BLUE, push till RED AND BLUE, release while constant RED AND BLUE, ignition ON...but do not get the quick flash of RED AND BLUE w/ YELLOW ignition led on. Can you please guide me to what my issue is PLEASE? Remote start via factory lock unlock lock works along with door lock/ unlock like it should. Located in the eastern states. THANK YOU IN ADVANCE ! ABSOLUTELY LOVE THE FORTIN BRAND AND PRODUCTS.

0

2010 Ford Taurus standalone no tach signal

|nstalled EVO-ALL and THAR FOR4 into 2010 Ford Taurus standard key, standalone. Car will start and die after 5 seconds with evo red light flashing 3x for no tach detected. Used latest firmware and have tried backdating as well. Have also tried 2 other EVO-ALL modules with no success. Using Decryptor one key method. Serial # 001A07 153393.

0

no remote start

2006 ford freestyle. I have 2 keys. Hard wired in. The bcm i think is wrong for wire colors. it looks like the wires are in the blue connector and the - disarm is a light blue wire. could not find the light blue with black tracer. For disarm. plug in module goes to red let up insert first key to run position for 3 seconds. led lights on module turn red and yellow turn off remove key insert second key red light flashes 1 time remove key press and hold red light flashes 1 time let up on button .press fob lock 3x and no led flashing 10x. Any ideas would be great I have the lastes firm ware and udates in.

0

Remote start no heat

Hi, I just bought an evo-all with fort 3 harness for my 2017 F-150 2.7leb. Remote start works well and I enabled climate control and rear defrost with Forscan, but climate control center is dark and off until I insert the key. Climate control is manual. Tried all settings no luck. What am I missing?

1

2017 Ford F-250

Vehicle 2017 Ford F-250 

Product. Evo-all Service # 001a06749339 That-ford2 t harness  Install guide # 59421   Installed according the install hour minus the lights . I don’t want my lights to work . Having problems programming. I get all the way to the point of the the truck ingnition turning in and that’s it. After that the blue LED does not flash or do anything after the ignition is on.  The truck has a factory hood pin as well and the hood is closed .  I also tried to reset  the unit and start over in the reprogramming, that didn’t help. 

-1

still need anwser to my question.

at end of the programming i get 10 red flashes then 10 blue.....ignition turns on the off as it is supposed to......doors are closed and lock pushed 3 times and no start...i get 1 blue flash with each lock push.....2008 ford edge.... Ok. im officialy done. i dont understand anything, great tech support. sending back for refund and buying different brand that will take the time and effort to offer real tech support and anwser questions(not just state what the instructions say).

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue