Questions & Answers

Hello, Evo-All on a 2014 Hyundai Elantra standard key, Service Number: 001A06 357048 I need a flash limit reset please. Thank you!

EVO-ONE. Device Flash Limit Reached. (Remote Start Not Working and other issues). EVO-ONE S/N: 002B07 337434 (Starter Vr. 7.1.21), (EVO-ALL Vr. 2.4.18), Date: 02/2019. Car Mazda CX-5 2014 PTS A/T - EVO-ONE + THAR-ONE-MAZ3. Two OEM Remotes. Car OEM alarm system with its hood switch. Hello, when I try to change or update firmware to the EVO-ONE on Remote Start panel the FlashLink Manager says: Device Flash Limit Reached. Could you please reset my EVO-ONE completely as it was when I got it in 2019?, so I could config and install it again. Looking forward to your reply. Thank you. Anyway, this is what happened to me if it is in your interest to know: Module EVO-ONE installed by myself following Fortin guides and working since March 2019 till few weeks ago. The module went working fine for several years till the day when it didn't start the engine, despite all the sequences on the module and on the car were ok as usual. First I tried to reconfig some controls on the module through FlashLink Manager, very few of them because I do not know what exactly they do and I do not want to damage both the car and the module. No Valet mode. No luck. So I decided to reinstall / update the module with the latest Firmware versions, both ByP (85.14v) and R/S (1.26v). With no luck. Then I noticed something new on the car panel, it randomly started to show (only one of them at every attempt to start the car) the following alerts: "Key not found" (despite being into the car), "Brake-Pedal inspection needed" and "Check system key". Arm / disarm car and parking lights worked and blink ok as usual. That all took me back into having a look at all intallation Fortin guides to this car. I thought those panel alerts were caused (perhaps), because of updating firmwares on the module, so I installed some previous firmwares and tried in the car, no luck. Then I Master Reset the Bypass (https://fortin.ca/en/download/61931/61931.pdf). All leds on the module were blinking ok so it seems to work fine. OEM remotes work (open / close the car), and also I can change and save config options on the pc through FlashLink Manager. Still stuck in the same issue though, it didn´t start the engine and those alerts on the car panel persist (randomly). Then I also tried to reset the Remote Starter (https://fortin.ca/en/download/61941/61941.pdf), no luck even to get it reset. (Is there any other way to reset the R/S I am missing?). After some Remote Starter firmware updates were installed into the module and tested in the car, something new happened in the car panel: it turned crazy with all the lights and icons on the panel randomly flashing. I stoped this flashing just pussing twice PST button. Arm / disarm car and parking lights were Not working as they should be. This flashing crazy lights on the panel disapeared once I removed the module and the harness form the car. Icons panel got back to normality. Every time connecting and disconnecting module from the car, car battery (-) was disconnected. Finally, and after another R/S firmware update on the module, it looks like the module has been blocked because the three leds (blue, yellow and red), blink at the same time for 25 times. Module does this kind fo blink every time I connect either to the Flashlink Manager on the pc (when selecting Remote Starter config panel), and to the car harness. At this point, when the module is connected to the car there is no light (response) on the blue led when I press any button of the OEM remote (despite they open/close the car). I can start/stop the car with PST (yellow led on the module lights). And now when I try to change or update firmware to the Remote Starter the FlashLink Manager says: Device Flash Limit Reached. Please any help from you very appreciated. I would like to get the module working back in the car as it was since 2019. Looking forward to your reply. Thank you.

S/N 001A07 047048 Thank you

sn 001A04 068596

Hi guys here again with this box. Hi Derek, this box it's locked, I can't flash it and Decrypt. By the way, please this box was locked trying to use on 2013 Hyundai Elantra. I tried with each firmware and doesn't work with any of them. Could you please check all these firmwares? When I try programming it, the red led remain on red. Pressing the program button or not once you plug the 12v harness. Thanks you so much! S/N: 002B04 689843

Hi guys. Hi Derek, this box it's locked, I can't flash it and Decrypt. Could you please reset it? Thanks you so much! S/N: 002B04 689843

I have two devices and I want to reprogram them to the factory prado 2018 I hope that the factory will be tuned for both devices, and they are sn/ 001A07595395 sn/ 001A07611585 I apologize to you and that the reason is that the vehicle's computer was changed and when I want to program it does not accept programming And thank you for dealing with us

Limit Reached on EVOALL. Can you please Reset?

Device flash limit reached. Could you please reset it? Thank you. Service# 001A06 599017

Greetings! Please, I need support with the following. Evo-All RS (EVO-TOYT6). After configuring it once, I received the following error: "EMPTY KEY DATA". Now after trying several times, I am receiving this error message: DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR" What could be the issue? How to reset it? Thanks for the support. Joe

la limite de flash est atteinte ,est-ce que pouvez me réinitialiser svp # 002B04 689848

I have a dodge ram 2500 diesel. Evo-one SN 002B04 627616 date: 06/23 does not let me do the flash update. Says device flash limit reached. Please help

helllo can you reset my divice 001A06426026

Hello, I am trying to correct an issue. Bought this as a set (LINKR-LTX) however I get no feedback/confirmation. this was set for the wrong car choice. I tried to change some settings and reached the flash limit and now nothing works. everything works as it should on my F250. however the transit connect never worked correctly.

SN: 001A07 610229 Flash limit has been reached and I'm unable to flash a different firmware or go through the dcryptor process.

hi i was programmig my newly bought EVO-VWT3 system, and both times programming it would stuck on yellow and red flashing... now i have reached the dcryptor limit... can we reset this please, SN: 001A07 367315

Trying to program new Toyota Tacoma after old one was in accident, says I have reached my Dcryptor limit. Please reset device S/N 001A07 228414

Hello I am not able to get my remote start working and unable to follow the decrypt process for my WRX. Please reset the flash count on my evo one please and thank you. sn:002b03 046373

I just bought EVO-MAZT1. First time flashing but I get a message that the device cannot be flashed anymore. Service# 001A06 557023

Hello! I buy 5 new module, Not one of the five modules is flashed. Help me please 001A06 562668, 001A06 540339, 001A06481631, 001A06 503255, 001A06 540373

Evo All Reahed the limit Service # 001A06380592. This one is never install with firware # 74.26 in which car i can use it as bypass? Thanks julius_pajarillo2000@yahoo.com

Need to reset 002804 648 095. Thank you

Hello, please unlock my Evo-One Decryptor as I am receiving following warning: dcryptor limit has been reached for this car. S/N: 002B04 278169 Thank you in advance.

Hi there, please I need unlock Decryptor option for this box. Thanks you. S/N: 001A07564478