I've validated the CAMBUS test and the EVO-ONE confirms good wire connections. EVO-ONE was just master reset (bypass side) and reflashed with latest bypass and remote-start firmware. After the initial programming, it learns the H-Key and recognizes the OEM key fob presses (blue flashes on module). All OEM features work properly.
3x key press remote start not working. In fact, when pressing lock 3x I notice the blue light seems it cannot "keep up" with every key press. If I press the lock key on key fob 3 times in 3 seconds the blue light may blink 3 times but usually twice.
I am at a loss because before I was at least able to unlock then lock 4-6 times and the car would start but never respond to any OEM key fob presses for remote entry or remote shut down (only way for the remote start to be killed is to depress the brake pedal with no key in ignition, even inserting key... turning to RUN... then removing the key would not turn off the remote start). It seems as if OEM key fob signals are hit are miss when communicating with the EVO-ONE module. Validated wire connections and not using any t-taps.
EDIT: 2014 Toyota Highlander LE, H-Key, automatic, OEM alarm, OEM keyless entry, OEM key & key fob combo key, electric rear lift gate
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
