Hey guys I got another quick question,
I purchased the EVO All, THAR-FOR1 T-Harness and RFK442 RF Kit which I will be installing soon for remote start functionality.
So my 2011 F-150 did not come with power locks so I wired up a relay with a momentary switch a few days ago which is working well so far (see link for wiring diagram below).
https://www.caraudioforumz.com/attachments/car-alarm-mobile-security-85/14792-wiring-diagram-aftermarket-door-locks-trim.jpg
My question was, would it be ok to hook up the lock pin A19 and unlock pin A5 on the EVO All (see Fortin wiring diagram below) to pin 85 and 86 which go to the momentary switch (see other wiring diagram).
https://fortin.ca/download/94891/EVO-ALL_IG_RTS_BI_FOR-FSERIES-2011-2016_KEY80bits_D_94891.pdf
My thought process here was that say for example, I click lock on the RF Kit which would send the command to the EVO All and then the EVO ALL would send voltage to the relay and finally the door will lock?
Did I get this right? What's confusing me is why a diode is needed in that orientation, seems like it will be blocking the lock signal?
Thank you so much!
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
