We purchase the EVO-ALL for our son thischristmas, from MPC ( I think ), because he wanted to add remote start to his car. It's a 2011 Ford Taurus, the unit was supposed to come preconfigured. We installed the unit and the key does remote start the car now, however it only runs for about 5 seconds, then shuts down. The red light comes on, it starts for 5 seconds, then the yellow light flashes and it cuts off. Then the red light comes on again and the engines starts, then it dies again after 5 seconds. The yellow light comes on steady and the red light flashes 3 times. then they all turn off. All the doors are shut. I've tried to get support from MPC but, they last suggested that I program the tach, but their instructions weren't very clear. They wrote "Press the program button (red 2 pin blue plug that plugs into the LC/RS) 5 times", but there is no red 2 pin blue plug. Any help getting this working would be great.
Tach programming
Start the car with the key
Press the program button (red 2 pin blue plug that plugs into the LC/RS) 5 times
The LED on the side of the LC/RS will blink 5 times (this enters program mode)
Press the program button 1 more time
The LED will blink 1 time (this selects tach programming)
Press the brake pedal 1 time
The LED will blink 1 time (this confirms it learned the tach)
Turn the key off.
Test.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
