fitting a evo-forte1 to 2015 ford kuga. I'm not getting any blue led when pressing the ome remote. it seems to program as it should as per the guide. I've got options a1 to a11 turned on options c1 and d1 are also on.
I've tried grounding the blue wire and no lights come on, when I touch the yellow/ black to ground the red led will come on and the car will start.. the car will stop after that if I remove the red plug but will re-start when it's put back in.
have checked the hi/low can wires over and they seam to bo ok, are they the only two wires that make the blue led flash ??
any help would be much appreciated...