Using an EVO-ONE with the THAR-ONE-KHY2 harness and RFK942 kit. Everything works except when the unit sends a lock or unlock command on the can-bus it looks like the BCM momentarily loses power in the middle of the lock/unlock pulse. The locks will do a quick double pulse (as in power being lost in the middle of the normal pulse) and you can see the dome light do a quick flash and the OEM hazards flicker for a moment.
If the ignition is on and you press the lock or unlock button you can actually see cluster show a FUSE error along with some other warning lights that flash quickly during the "blip" of lost power.
The interesting thing is when I enabled driver door priority this doesn't happen during the first unlock pulse.
It's not the RF kit since it does the same thing when you do a remote start, you can hear the locks going haywire along with the dome light/hazards flickering for a bit just before it starts up.
Tried different firmware versions with the same results, not sure what else to try other than disabling lock control through the canbus and hardwiring it.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
