Questions & Réponses

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom