Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

2

How to check if my module is properly configured

Ever wonder how your module has been set up? If you have the correct firmware and options for your vehicle?

Did you know you can check all of these things simply by entering the service number on the back of the module in the search bar located on fortin.ca!

Give it a shot the next time you are unsure of how the module has been configured!

 

6

FAQ: How to program 3x Lock Start on the EVO-ONE

Your best bet here is to follow the step-by-step guide available here : EVO-ONE & OEM Remotes

    That guide covers basic option setting for 3x Lock Start on Automatic vehicles. If your vehicle is Manual/Standard transmission, you will also have to enable option 33.2. Flash-Link Updater REQUIRED

Quick Run down.

The EVO-ONE has two sets of options. There are options for the remote starter portion while there are also options for the bypass portion of the unit. The remote starter options are used mainly for convenience features such as enabling 3x lock start, alarm functions, cold timers etc... while the bypass options are there to set various DATA / Can-Bus features such as the all important OEM Remote Monitoring.

 

To toggle between remote starter and bypass options (and firmware updates) via the Flash-Link Manager, you must press the TOGGLE button in the flash-link manager program while the unit is disconnected. There is a text on the bottom right corner that will tell you if you are in Connection Mode : Bypass or Connection Mode : Remote Starter.

 

While Connection Mode : Remote Starter is active, go to the EVO-ONE Options tab and enable the following option(s).

    Option 38.2 - Enable 3x Lock Start (this tells the remote starter that it will be controlled via the oem remote commands detected and then sent via the integrated bypass module) Option 33.2 - Enable this option only if you have a manual transmission vehicle. While here, if the vehicle specific install guide also mentions other required options, please set them now. Don't forget to SAVE OPTIONS.

 

While Connection Mode : Bypass is active,

    First, make sure you have selected and flashed the unit to the latest firmware for your vehicle. You will find the latest firmware under the EVO-ONE Updates tab. Go to EVO-ONE Options Scroll through the options and enable Option C1 - OEM Remote Monitoring (this option allows the bypass portion to actually monitor the oem remotes so that the previous 38.2 option can actually work). Attention! Please leave all the A1-A11 options untouched unless told otherwise. Don't forget to SAVE OPTIONS

 

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer