I follow the Guide # 27481 Connection 2 , Programming 2 , also did lock/unlock, Horn, disarm, GWR to Key Sense and foot brake wires. When using the Drone app to start the car it would not start or do anything at all, no parking light flash, no light from the 3 LED beside the red light by the yellow wire cut loop.
When the lock/unlock on the Drone app is press the door would lock/unlock/disarm parking light flash and still no start. I have reset and master reset the module, reprogram, check all the wires and relocate the ground wire still won't start or hear the relay.
Did I not program it right or am I missing some wires connection?
Bypass Firmware version: 73.26
Remote Starter Firmware version: 0.50 Drone
What I have hook up
(6-PIN) POWER CONNECTOR
(+) Ignition Pink to Black/Yellow car (+) Ignition
(+) Starter Yellow to Black/White car (+) Starter
(+) Accessory Orange to Yellow car (+) Accessory
(+) Parking Light White to Red/Black car (+) Parking Light
(+) 12v Red to White car (+) 12v
(6-PIN) BYPASS RELAY
D6 White/Red to Pink (cut) at Ignition barrel going out pin 5 Security Light
D4 White/Green to Pink (cut) at Ignition barrel side of pin 5 Security Light
(20-PIN) SECONDARY CONNECTOR
A1 to (+) Ignition
A2 to (-) Black/Orange car Lock
A3 to (-) Blue/Orange car Unlock
A6 to (-) Pink/Black Disarm
A7 to (-) lt. green/blue Horn
A8 to blue/black Key Sense
A10 to Red/Green Data Pin2
A11 to (+) White/black Brake wire
Would it be better to used RF kit before the Drone, seem the Alarm is working but not the remote start.
Well, right now the Evo one is out of the car so I won’t be able to go at it until the weekend the only time I’m free. Any help would be great or anyone who have done 2005 Honda Pilot Evo One with Drone with some input how you got it to work would be great too.
Thank you,
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
