While installing the EVO One to my 2010 Acura TL (with Push-to-Start) I found that several of the wire colors called out by the installation (REV:20191022, Guide 19411) and the Wire Color guide did not match what the car has (on gray 32 pin connector and blue 36 pin connector). I proceeded by connecting at the specified locations shown on the diagram. Once the connections were completed, I attempted to program the module (which was updated and programmed with the Flash Link Updater). Step 1-4 went OK, however, when I got to step 5 (Do not press the brake pedal. Press the Push-to- Start button twice to turn on the ignition-- The RED LED will flash rapidly 10x times. -- Key bypass programmed. --The BLUE LED will flash rapidly. --CAN-Bus programmed.), the red LED extinguished and I could not complete the programming. I tried this several time with the same results. Your help with this issue will be greatly appreciated.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
