I am able to get to step 6 of the Evo-all chrt6 install in my 2015 ram diesel tip key install.
At the end of step 6 the red led light is on on the evo unit. I wait several minutes for the lights on teh dash to turn off, and then put the key in the ignition, but i am not seeing the blue led light up.
i have triple checked and reconnected the yellow wire to the pink/grn wire as well as both can bus wires to the obd connector, and have double checked the blue and blue/blk wires.
i have checked for voltage on each wire, 12 volts on ignition when on, 12 volts on blue/blk when off dropping to 9v when key is in. 0 volts on blue with it going to 5 when running. i see 2.5 volts on can lo when on and 3.0 volts on can high when on.
with more monkehying i can now get it to detect the key insert on step 7 but it is not getting to a flashing blue led.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
