When performing the steps to learn the device to the EVO One, the top yellow LED lights up initially and the side red LED and parking lights blink with each click of the valet button. However, I am not receiving the final blink of the red LED to confirm it has been learned to the unit.
I am using the LLRS-HRN-01 adapter and the LEDS on the LT3 are lit to confirm both a cell and GPS signal are active. The LINKR LTX mobile app is also set to the Fortin protocol and displays my correct GPS location. Unfortunately, no commands to lock/unlock the door and remote starting will work. In every EVO-One to LINKR programming guide I've found, it states you have to set Fortin 2 as the RF Kit in Flashlink Manager. I have found no RF Kit option for this within both the Pro and Wizard modes in Flashlink Manager 4. I ended up choosing the Fortin EVO LTE as the RF Kit figuring it would be the closest option and I'm wondering if this is the root of my issue.
Has anyone else been able to get the LT3 to work with the EVO One successfully?
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Buick
Cadillac
Chevrolet
Ford
GMC
Hyundai
Kia
Mazda
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
