I purchased a flashlink programmer and still can not get this to work correctly. I also purchased a RF641 key fob set and still no luck. It cranks the ignition as it should but will not activate the imoblizer bypass. I have tried to program this at least 50 times using a stopwatch. I have also checked the wires and probed them no less than 20 times. I get a red light as normal then insert the first key for 3 seconds with solid red light and yellow turns on solid as soon as ignition is activated. Insert second key and yellow stays lit and a second into it the red starts flashing until the both go out. Can you please help?