I installed the EVO-GMT4 as a standalone bypass module that's when you remote start the truck by pressing the oem remote lock button 3X and it worke fine, now I'm trying to install a aftermarket remote start (crimestopper remote starer sp-502). I installed and programmed and flashed the bypass module with the aftermarket remote starter exactly as the installation instructions from the fortin website shows, dash lights up but no crank, my question is, is there a wire o wires that I'm missing or a setting on the flashlink manager.(years ago I did the same installation with evo all and crimestopper remote starer sp-502 on a 2011 chevy malibu with no problem.