Hi guys
I got the Fortin Evo-NIST1 with T-Harness and followed guide 80851 for auto transmission.
I got all the wires mentioned connected. Brown wire from t harness to red wire by driver kick panel and the whiteblk to push start brown wire, at the bcm I got the two wires in the pin and tapped the 2nd wire which is red for me in the bcm. The bcm pin wire for (-) door pin is red color wire for me. The programming went smooth but The car doesn't start. When diagnosting I touch the dkblue wire to ground the break lights up and the module has red light. Three times lock the module blinks blue and that's all.
Three times lock button module blinks blue everytime but the car does not start. The module does not have any lights after the blue blinks.
Please help.