Installing the Evo-All (Service #001A06 770324) w/ t-harness in a 2014 Ford Edge with in dash key start. I have made all the connections and rechecked the can bus high and low connections. I made sure with a multi-meter through the OBD2 connector to the connector on the Evo-All that they have connection. I have programed the unit, everything has gone as planned. When I push the lock button the blue light flashes on the Evo-All and the horn honks on the second and third button push but the car does not start. The ignition does not come on.
After contacting Fortin they had me connect the dark blue wire (A8) from the 20 pin connector to ground and the red light did not come on. Then I connected the yellow/black(A13) to ground and the car does not start.
I first contacted My Push Cart with my issues, the first Evo-All was programmed wrong so that I had to order another unit. I installed the second unit with the same results. I contacted My Push Cart again and they walked me through the programming of the unit and still had the same result, after pushing the lock button 3x (blue light flashes with each lock button press) nothing happens, no ignition, no start.
What can I do next to get this unit working?
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
