Having an issue with 2010 kia soul with normal key, wired up correctly but has no immoblizer wire, do i need to connect red connector to white connector wires still. Instructions aren't very good on this point. It says "US models: if the (~) Data wire is not present the vehicle is not equipped with an immoblizer. For CAN functions use programming #2. I have tired programming to #2 and blue light is on then wihen I turn the key on blue light goes out and doesn't flash at all but when I turn the key off blue light comes back on. It does not flash at all. Please Help. No remote start installed. Using as standalone. CAN Bus wires good 2.5v on each at all times.