Hi all. I have an EVO ALL with the Ford1 T-harness that I'm trying to install into my 2011 F-150 standard key for remote start. I have followed all the instructions and when I get to releasing on red + blue like the instructions state the programming does not go as described. The instructions say after putting key 1 back in I should get 10 blue flashes and 10 red flashes. In my case the truck locks and unlocks and then I get 10 red flashes only, blue stays on. After this, all LEDs turn off and pressing lock 3 times only makes the blue led flash and nothing else, no start. Any ideas? Thanks in advance.