Installed EVO-FORT1 /EVOALL standalone 3x lock into a 2007 Ford Edge. Install went well, when testing noticed that vehicle will not shut down with brake pedal pressed. Verified gray and gray/black connections to obd connector wires, are exactly as shown in diagram, color and pin position. Ended up setting it to shut down on door open as a temporary solution. Also, not related, but noticed that it is possible to start vehicle now by pressing 7 and 9 buttons on drivers door keypad together 3x, fob not needed. Is there a way around this so random people cannot walk by and start the vehicle? I have noticed a few other questions on this forum asking about the brake pedal not shutting vehicle down when on standalone but do not have a onclusive answer as to how to resolve te issue. Is there a way to make this work properly? Thanks, Mike.