Utilisateur

My remote starter crimestopper with evo all and t harness was working fine. I redid the install made the immo cut and reflashed to 73.23 put back in car and tried the crimestopper remote, lock unlock worked cranked but did not start green key flashing on dash, so i reprogrammed evo all and car started just fine, tried 3xlock and car does unlock lock but won't start, no crank no dash lights, blue light on evo comes on with every press of oem key fob then red light comes on for about 2-3 seconds. Now remote start not working at all not even with crimestopper remote, crimestopper does 3 chirp confirmation but thats all it does. Everything was working fine on old install even 3xlock

i have an issue with getting the remote start portion of my evo-all to work with my crimestopper RS7-G5. I had a thar-gm1, which i made into a v2, but still did not work. I then removed the harness and followed the directions on guide 29071 instead. it yelded the same results. the evo-all seemed to program correctly but i am not sure of what the options should be, can you help on that ?

Here is all info on what products I have, with links to the pdf's of the manuals showing what I have wired up.. All with a full explanation of what is not working, and what it does while trying to start.... Vehicle: 2008 Dodge Caliber SRT4 Fortin Evo-all with the T-harness ( just purchased the flash link updater ) Crime Stopper SP-502 with the data ports ( Evo is default ). I updated the evo-all via the flash link device to the newest firmware, and the newest update for my evo-all. I did not change any options on the evo-all except for the priority driver door unlock, and then I made sure that the evo-all knew to use the data port for evo series.... ---------------------------------------------------------------------------------------- I followed the instructions that came with the fortin evo-all first... using install directions "A" see here: ( http://fortin.ca/download/28831/evo-all_evochrt5_p20160902.pdf ) I then went to the crimestopper book and followed the install diagram in their book see here : ( http://www.crimestopper.com/cstech/library/security/security_systems/security_keyless_entry/sp-402_sp-502_ins_rev_09-28-2012_green%20kill.pdf ) its near the end shows the module and all the wiring. All options work as expected, except for the siren ( crime stopper side ) and the remote start, which I am not sure is the crime stopper or the fortin.... THe error I am getting when I try to remote start my vehicle is that the ignition is on prior to the remote start... ( this is from the flashes I get from my crime stopper ) I notice when I am in the car, the yellow light on the fortin is on and I believe the red light. ( I can take a video if need be ). I would love to praise the ease of install from the evo-all product and the wirecolor site, but at this point I am highly frustrated. It seems that there might possibly be a conflict between the two boxes, and something is keeping the car from cranking.... Please someone help. I want to put my dash back together.

I'm trying to use the remote start (or push to start?) feature to replace my factory key. I need to prevent the vehicle from shutting off. I disable the foot brake option and was able to drive it but it died on the freeway!!! Very unsafe! - 2008 Dodge Sprinter w/ Crimestopper SP502 for remote start