I am attemping to install a ProStart 2-Way LCD Remote Starter, 6-Button onto a Toyota Sienna 2002 with Fortin EVO-ALL bypass module. I have made all the necessary connections to the remote starter, programmed successfully; doors, locking, unlock worked. Now I believe, my problem lies within the EVO-ALL bypass. I followed this guide: http://fortin.ca/download/5801/evo-all_toyotalexus_regconfig_cahierd20120813.pdf (connection 2, program 1) posted on the fortin website. When I went to program the bypass module it stayed at the red solid LED and would not flash red rapidly for 10 secs. My questions are:
1. The remote starter in the mode 4 function 4, it has 3 options: 1- way ADS (D2D), 2-way XpressKIT (D2D) and 1-way Fortin(D2D). So now, which one should I select? . I've try using 1-way D2D mode in the remote starter and hardwiring the bypass data link wires (red to +12V and black to ground(-)) and still doesn't programmed. I also tried switching the option to 2-way XpressKIT, bypass wont program.
2. Following the above question, would I need to use a flash link manager to change my Fortin bypass to Fortin2 (2-way D2D)? Is this an option?
3. The guide doesn't state that this vehicle need to connect the 5 pin CAN BUS connector. Am I correct?
4. What can I possibly do to resolve this?
Thanks,
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
