I am using the EVO-All as a stand alone on a 2006 Jeep commander. In order to simplify the transducer connections I am using a THAR-CHR5 harness. I wired it according to guide EVO=CHRT5 schematic F. I have programed the evo all as a stand alone and set the option to unlock then lock after remote start. The car does remote start with 3 key presses of the oem remote. I have detected 2 problems with the doors. First off it will remote start with the doors open and with the doors closed it will unlock the doors but not lock them after a start. It also does not shut down with a brake application. Should I have not used the T-harness and wired it according to Guide 8141 connection 2 and not used the T-harness?