I am working on a 1999 Ford F-150 with an EVO-ONE to act as a bypass and remote starter.
I have before gotten the ONE to start the vehilce, however the next day the box does not seem to work as a bypass anymore. I can put the key in the ignition and start the vehicle with the button on the fob (Using Fortins RF-642 remotes). I can confirm that all of my wires are correct and properly attached for the data. To fix this, i tried to re-program the bypass, and the box will not enter bypass programming. I have unpluged the box, held down the button on the box, then plugged in the 6-pin connector and the LED's on the box will not flash.
Is there an alternate way to enter this programming mode or is my box shot?
For solutions, i have access to the programmer for the EVO-ONE.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
