I have checked the wiring multiple times, the yellow loop is cut, option C1 is enabled, option 38.2 is selected, I've tried to increase the tach time and still I cannot get it to start. I did not wire the door trigger (pins A17/A18) [conflicting information on location of this connection] or the parking lights (E1) at this time.
I am conducting two key programming per guide 28331. After the first part (pg 6), I get it to work through step 5, but step 6 will not allow the car to start. The unit does flash the blue light upon each press of the lock button on the OEM remote.
I have also tried to continue with steps 7-15 and they all respond as the guide indicates it should. Step 16, I just get a solid red light.
I have also ensured that all of the firmware is on the most current versions.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
