Guide # 77191
REV.: 20200407
2019 GMC Yukon – Push Button Start
EVO-ONE with THAR-GM6
1) Guide calls out D6 as White/Red. My T-Harness wire color is Blue/Black. Is this a problem?
2) Guide says to isolate wires D1 and D3 at the T-Harness connection. However, these wires terminate at BCM X2 (blue) pin 17. D1 terminates at the BCM side and D3 terminates at the truck side. Isolating the T-Harness wires would permanently disable this BCM circuit. Please confirm if the wires require isolating.
3) Guide calls out A3 as Purple/White. My T-Harness wire color is Purple/Black. Is this a problem?
4) The Guide says to install a hood pin. However, there doesn’t seem to be a provision to wire it up to the module.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
