Hi, I've installed the Evo All unit in my 2012 Ford Taurus (it's an automatic without push-to-start). I used the T-harness, and I connected the two CAN wires as instructed, as well as the yellow wire, light blue wire, and light blue/black wire to the corresponding wires on the 20 pin harness, as instructed. The t-harness is connected to the main ignition plug and the immobilizer plug with the factory plugs to each connected to the t-harness as shown in the install guide. The data portion of the programming seems to work fine, but I can't get the transponders to program. I've checked all of my connections at least 10 times. Help!