I have a Fortin EVO ALL with a Crimestopper RS1-G5 remote starter on my 2006 Honda Odyssey.
Remote start works great but I can not lock/unlock with the OEM remote while the remote start is active. When I press the lock/unlock buttons on the remote, the blue light on the EVO-ALL activates. If I manually unlock the doors with the key, the sliding door button on the OEM remote still works. I did not hard wire any connections to the lock/unlock wires as I thought the D2D connection between the starter and EVO-ALL would take care of that.
I searched and firmware is 4.18. I don't own a unit to upload the latest firmware. Would the update allow for the OEM remote to control the door locks while the engine is running? I've read mixed information on this. Or should I hardwire the lock/unlock wires to the EVO-ALL?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
