Please help - I purchased a vehicle with a Fortin Evo All using a Compustar ANT-2WSP as long range antenna with the Slice Jr. Two way remote. I recently had to have some minor body work done a windshield replacement and when I picked the car up, the remote start nor the lock/unlock via the Compustar remotes or Fortin Evo All worked anymore. I assume the battery was disconnected. I purchased a Flash Link 2 module, have since gotten the Evo All working via the OEM remote lock x 3, but I am having no luck getting the Evo All to recognize / program the Compustar remotes. Install looks as follows: ANT-2WSP antenna on windshield, it plugs into an iDatalink 2CS, which then plugs into the Evo All. I can get into the programming mode for the Compustar remotes (Blue and red LED, turn ignition on, All LEDs on) but when I try and program the remote to the EVO ALL by pressing the lock, unlock and holding the lock 3 secs for remote start, I get no confirmation on the Evo ALL (flashing Red & Blue LEDs). Any help would be greatly appreciated.
EDIT: All RF KIT selections are selected via the FlashLink 2 as prescribed from what I have found on this very helpful website.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
