I have a 2005 4Runner with the Evo One installed per guide 84911. Installed RFL942 RF kit. Was able to program unit with Flash Link Updater, and program one key for bypass. Was able to program both remotes. Can lock and unlock car with both remotes. Remote start will not work. When remote start is initiated, the red LED next to the programbutton on the Evo One will blink 3 times, and nothing more. Parking lights wil not blink. No ignition, no start, nothing more. The remote will report that the start did not work.
Also the RFK942 antenna bule LED does not light up. It did initially after install and remote programming, but it no longer does. I'm not sure if this is something that I turned off in the programming, as I tried several different options there, including starting over with the programming guide.
I attempted to factory reset the Evo One, however I was unable to get the unit to factory default, as described in the help links. I don't have a data link harness setup, so I was undertain if it is not possible, or if the reset can be attempted while connected to the Flash Link Updater. It's be nice if there was a factory default option in the PC program, but starting over seens to do the same thing.
What can I do to troubleshoot this? Is the unit defective, or am I missing some step?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
