Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Transponder

Hello

1-) I have two black car keys, one of which is a 3-button remote. Without transponder  Toyota Yaris 2007. Which module should I install? with keyless or without keyless?

2-) Is there a manual on how exactly I should do the wiring since there is no transponder in this vehicle?

0

Without transponder Toyota Yaris 2007

Hello, I need assistance. I don't have a transponder in my Toyota Yaris 2007. I have two black car keys, one of which is a 3-button remote. I selected Function 2-4 and Function 20-2. I installed the "without keyless" 2007 Yaris mod. I disconnected the yellow wires and connected the white one to the start input. During programming, I used the 3-button key, but the red light remains steady. The car isn't working; it only activates the any lights, and the lights flash irregularly. The device is "Evo One 2016" Ftx64-2w.

13/10/2023

Toyota akm (850Pts.)

0

Evo Start 2 Installation on other car without code

Planning to install Evo Start 2 on other car. For app installation, i don't know the code. Please let me know how to proceed as it is couple of year old and i don't have a box / original code. Thanks for help.

13/10/2023

Toyota akm (850Pts.)

0

Evo Start 2 Installation on other car without code

Planning to install Evo Start 2 on other car. For app installation, i don't know the code. Please let me know how to proceed as it is couple of year old and i don't have a box / original code. Thanks for help.

0

there are 3 wires that were not exactly specified to connect on Camry 2020 Push to Start

Hello all One All was installed on the 2020 Camry Push to Start from wire to wire, but there are 3 wires that were not exactly specified to connect. The wires are specified in the attached picture

https://drive.google.com/file/d/1J7xe9EEVPgkvmqURZfsdAlbcf-SmWtN9/view?usp=sharing

evo-all_ig_sal_bi_toy-camry_2020_pts_a_90691.pdf (fortin.ca)

I would also like to reset one all, please

 SN: 001A07253349

0

t harness eve-all with standard key Camry 2011

the wiring diagram in guide does not match colors for camry 2011, does the t-harness work with evo-all?

0

Guide for evo one 411 for 2005 toyota tundra

0

Three Wiring harness for 2013 Toyota tacoma g key?

I just want to make sure that the 2013 tacoma with the g key only needs one wiring harness for the igintion and that harness as well comes with the obd included in fortins evo on kit that they sell

0

Will i have to do any function and mode programming with the rf442 to match my settings on the evo one ?

Will I have to go into functions and modes in the 442 rf kit to match the evo one so it works, or is it good to go out of the box, this is for a 2017 Tacoma with the H key....NOT using OEM remote as I only have the key with no RKE buttons... ...I know I can program the 442 remotes to pair with the evo one, just wondered if I had to set the functions and modes to match the module....

0

EVO one on 07 Tacoma and Fortin RF641W RF Remote Kit

I installed the rf remote according to the instrucions siclucing the t-harnes which is not applicable to my application. In the RF remote box there were instrucions on how to connect the antenna to the EVO- All but nothing about the EVO-one. The only place that the black 4-pin data connector for the antenna kit plugs into the same one as the flash link. Is this correct? 

When ateempting to follow the instrucions for programming i get to step 5 where you press the botton for the blue and red lights to come on. then when I inseret the keys nothing happens. the yellow light never comes on and the antenna never flashes. i have double checked the wires and nothing seems to be out of place?

0

07 Tacoma with evo one rf remote compatibility.

I installed the Evo one using the instructions. When I was done programming and I removed the key from the ignition. The red light disappears and then no lights will reappear again. I have tried to re program and have checked every wire 5 times. The truck does not attempt to start when the button sequence completed, it acts normal. I am unsure what to do at this point. I posted this comment and your team pointed me in the direction of purchasing an rd remote. My new question is will this remote of amazon work or am I required to purchase one of your remotes off your website. https://www.amazon.com/dp/B077RK1721/?coliid=I1W0760N16V5W1&colid=3IM9C51TEGW1Z&psc=1&ref_=lv_ov_lig_dp_it

0

Evo one in 2011 toyota tacoma gkey

0

Is the evo-one 100% plug and play with the T-harness? (2015 Tacoma "G" key)

If not 100% plug and play. How many wires need to be connected, outside of the harness?

0

2015 Toyota Tacoma G-key Wire diagram

Just wanted to make sure .... I have a 2015 Toyota Tacoma with normal key. When I click on intallation guide for evo-one and thar-toy2 harness it says 2010? If I click evo all guide says 2010-2011. I just wanted to confirm these are both correct for a 2015. Thank you, Brian

0

Wiring diagram question 2014 Toyota Tacoma

I've installed 4 or 5 of these evo-ones in multiple vehicles with a t-harnes. However I have a quick question on this 2014 Toyota Tacoma 4cyl w/ t-harness. I just want to make sure I'm reading the diagram correctly before I start. Guide#19621. On the IMI wire... when the wire is cut at the white ecm plug. Do both of the following wires go to the ecm side of the plug? white/red D6 to the cut blue/white wire on Ecm plug side lt blue A20 to the same blue/white on Ecm plug side white/green D4 to the other cut end of the blue/white wire? Then just splice the IMO wire.. lt blue/black A10 to green/black at ecm plug Thanks

0

Wiring diagram question 2014 Toyota Tacoma

I've installed 4 or 5 of these evo-ones in multiple vehicles with a t-harnes. However I have a quick question on this 2014 Toyota Tacoma 4cyl w/ t-harness. I just want to make sure I'm reading the diagram correctly before I start. Guide#19621. On the IMI wire... when the wire is cut at the white ecm plug. Do both of the following wires go to the ecm side of the plug? white/red D6 to the cut blue/white wire on Ecm plug side lt blue A20 to the same blue/white on Ecm plug side white/green D4 to the other cut end of the blue/white wire? Then just splice the IMO wire.. lt blue/black A10 to green/black at ecm plug Thanks

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer