Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

2015 Kia Sorento Standard Key T-Harness Evo-One Step 4 Solid Amber Light

Installing a Evo-One in a 2015 Kia Sorento with T-Harness and standard key. Completed wiring. Spliced yellow A1 into pink ignition wire in T-Harness. Cut white wire in T-Harness. I have flashed the Evo-One with the lastest firmware in both remote start connection and bypass mode. In FlashLink Manager for desktop Pro Mode, I set the mode to OEM Lock-Unlock-Lock on 38.4(?). I am using an OEM key. That is the only option I configured. With the key out, I plug in the 6 wire harness while holding the programming button. Lights flash red->blue->red & blue->yellow and I release the button. Yellow is solid on, other lights are off. I plug in the remaining connectors. Insert the key into ignition, and turn to RUN position. The light stays solid yellow. I have probed the C2 & C4 and have 2.4v for CAN-Low at the C connector. I have 2.6v at the C1 & C3 connector for CAN-High. I can not get to the blue flashing x10 times in the programming steps. Car starts normally with key.

0

2006 Kia Sedona can't program it

Hello, I'm installing EVO-ONE with T-harness on 2006 Kia Sedona. I'm having a problem to program. The yellow led stays on solid when the key is run position. I'm not sure if I did the CAN2 wiring becuase there was no 6&14 pins on the OBD2 but found white & white black in other pins so I connected them. Please let me know what to do next urgently. Thank you Don

0

2006 Kia Sedona can't program it

Hello, I'm installing EVO-ONE with T-harness on 2006 Kia Sedona. I'm having a problem to program. The yellow led stays on solid when the key is run position. I'm not sure if I did the CAN2 wiring becuase there was no 6&14 pins on the OBD2 but found white & white black in other pins so I connected them. Please let me know what to do next urgently. Thank you Don

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer