English
Mon compte Créer un compte
English
EVO-START Wirecolor

Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

TOTAL ESTIMÉ :

Commander

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

Réinitialiser
Réduire tout
Tout développer
Réinitialiser
Réduire tout
Tout développer
picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question
LES + RECENTS A VOIR! LES + NOTÉÉS LES + RÉPONDUES LES + VUES

10/04/2021

 Infiniti Luis Sanchez2 (950Pts.)

0

Q40 Parking lights turn on intermittently on remote start

I have the EVO-ALL with the T-harness installed on my Infiniti Q40 and G37S Coupe. The options are set identically. On the G37, when I remote start, my parking lights always turn on when I remote start the car. This is not always true on my Q40. More times than not, the parking lights do not come on at all. Option A14 is currently off on both vehicles. I tried turning this option on on the Q40 but there is no change on how (when) it works. The only real difference between the two is the type of RF kit I have installed. Any help will be greatly appreciated. Edit: Lights come on every time I remote start the car in the garage. Not when I start it outside the garage and it's sunny and bright. Lights switch is set to off for each of the tests.
Connectez-vous pour répondre Voir 1 réponse(s)

07/11/2020

 Infiniti Nabeel Munir (130Pts.)

0

2008 infiniti g37s coupe push start automatic transmission from us in miles

Hi guys I got the Fortin Evo-NIST1 with T-Harness and followed guide 80851 for auto transmission. I got all the wires mentioned connected. Brown wire from t harness to red wire by driver kick panel and the whiteblk to push start brown wire, at the bcm I got the two wires in the pin and tapped the 2nd wire which is red for me in the bcm. The bcm pin wire for (-) door pin is red color wire for me. The programming went smooth but The car doesn't start. When diagnosting I touch the dkblue wire to ground the break lights up and the module has red light. Three times lock the module blinks blue and that's all. Three times lock button module blinks blue everytime but the car does not start. The module does not have any lights after the blue blinks. Please help.
Connectez-vous pour répondre Voir 1 réponse(s)

13/03/2019

 Infiniti herbie yang (160Pts.)

0

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result. I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2) but have the same result. I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated.
Connectez-vous pour répondre Voir 1 réponse(s)

27/02/2017

 Infiniti James Terry (190Pts.)

0

Starter Over Cranking Evo-One with harness 2008 Infiniti QX56 with intelli-key

when remote starting the starter is over cranking. It is wired to the can bus and programmed to tachless/data link but it still over cranks.
Connectez-vous pour répondre Voir 1 réponse(s)

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer