2011 Chrysler Town and Country (manufacture date: 6/11 - similar to 2012-15 models)
I installed the Fortin Evo using the T-harness (CHRT-4) and it remote-starts on lock 3x perfectly! However, when I connected the parking lights according to documentation and videos (soldered a 1K-ohm resistor onto the brown/white wire on the Fortin, tapped into the white/green wire on the headlight/parking light switch), instead of just the parking lights flashing/remaining on, it also activates both the headlights and foglights each time I either start or just lock or unlock the vehicle from the FOB. Supposedly I tapped into the correct white/green wire, but it doesn't appear so. Which wire from the headlight switch works just the parking lights? Thanks!