I'm trying to solve the no start issue on a 2006 525xi using an EVO-ALL & INT-BMW2.
After checking my wiring several times, I feel I need to understand how the brake circuit on the INT-BMW2 module works before I can further troubleshoot.
In the image below, I highlighted the stock function of the factory brake wires.
A) What I need to know is a breakdown of what each of the 4 brake wires from the INT-BMW2 module are doing during the remote start sequence.
So something like this:
Ingnition on: Brake X & Brake Y @ 12V.
Starter on (accessory off): Brake Y @ 12V, Brake Z @ 0V.
Engine running: Brake X & Brake Y....
B) Also, can I get the actual pin numbers & their corresponding colors for the 14-pin connector on the INT-BMW2? Just want to confirm all the wire colours are in their appropriate pin location.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
