Purchased pre-flashed and tested. The EVO-ONE programs correctly and blue LED flashes when key lock pressed. On third press a click from the EVO and red LED comes on. Second click from the EVO after about one second of the red LED illuminating and then nothing. No further LED's no crank attempt. I have verified continuity on all connected wires from origination to EVO connection harness. I have also verified correct outputs from EVO t-harness to correct ignition wire per the 2.4 programmable output options the EVO is programmed to and at this point completely out of ideas. I appreciate any insight.
Thanks
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
