I installed the Evo, just the T connectors and the PTS wire and it is working Okay. I haven't connected the wires for the door locks or the door pin because there is a conflict.
According to the EVO guide for this vehicle, A4 and A5 should be connected to the BCM on pin 15 and pin 37 respectively and the door pin A15 to pin 39. I was reluctant to make these connections because according to the Infiniti QX50 service manual http://www.nicoclub.com/FSM/QX50/2014%20QX50/BCS.pdf , pin 15 on the BCM is an output for the ACC indicator lamp; it has nothing to do with door locks. Pin 37 isn't documented in the service manual, but pin 39 is an output for the backdoor antenna; certainly not the door pin. Can you please verify these connections? I want to finish the job, but I don't want to screw up the electronics in this car.
Thanks!