I have an EVO-ALL originally programmed to use Factory 3x start.
I added the RF642W followed the programming intructions succesfully paired the remotes to the system and when testing the remote units talk to the EVO but when attempting to start it only turns on the RED light, then the yellow light but no blue and will not start the car, it also will not lock or unlock with RF kit Here are the internal settings. A1, A2, A3, A4, A7 thru 11 all on. I also have B2 on but have also attempted install with it off. C1 is on also attempted with it off. D1 on with 30min runtime. D2 on and H on with H2 selected. Flashlink manager is 4.36 with EVO-ALL running 74.{38} firmware and 6.0 hardware.
What did I do wrong. Unit was running perfectly with 3x start
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
