When I remote start it sets off the OEM alarm. Firmware 71.52 has been flashed as listed in Guide 94891 but in flashlink manager 4 it recommends 71.49, is the correct frimware 71.52? A5, C1, A11 and D1.1 is on. H2 is set to fortin 2.
I can remote unlock, wait 3 seconds then initiate remote start and the OEM alarm will not go off with that sequence. Any ideas what why the OEM alarm is not disarming when remote starting without unlocking? I understand from reading with A5 turned on it should manage this. I tried turning on D2 for the heck of it but it does not allow enough time after unlock to disarm the OEM alarm, it still sets it off with it turned on.