2009 Jeep Compass automatic. Kit is EVO-CHRT5 with a built in T-Harness and a EVO-ALL
Install is complete and programming procedure completes correctly at each step. No extra sensors- no hood switch or valet switch yet.
But there is no start with the remote. Vehicle starts normally with the key in the ignition.
I received a code in the box for wiring color setup and had to choose from about 8 guides. The displayed numbers mean nothing as the numbers at the top of the pages when printed show something different. I am using Guide 63651.
Besides the T-connections, I also connected the two yellow wires together. No other wires were connected and I am not sure what to do with the purple wire #18 as the drawing says it goes to the kick panel at item 3. What is it wired to?
A troubleshooting guide says to check for power at yellow/red and yellow/blue. I get nothing when trying to start.
New: I found a comment on a youtube video about hooking the green/red wire to the purple wire in the T-harness. That does not make any difference for me. Still no attempt by the car to turn on or to crank. Of course the horn honks and the doors lock each time I hit the lock button.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
